Oki MB472dn User Manual - page 100
of
1137
Setting a Binding Position for Duplex Scanning
To set a binding position for duplex scanning with Scan to PC and Remote Scan via WSD Scan, follow the procedure below.
1.
Press
(SETTING).
2.
Press to select [Admin Setup], and then press (OK).
3.
Enter the administrator password.
4.
Select [Enter], and then press (OK).
5.
Press to select [Scanner Setup], and then press (OK).
6.
Press to select [WSD Scan Setup], and then press (OK).
7.
Press to select [Binding], and then press (OK).
Available document binding positions
Long Edge Bind*, Short Edge Bind
* indicates the factory default setting.
8.
Press to select a binding position, and then press (OK).
9.
Press until the top screen is displayed.
99