Oki MB472dn User Manual - page 271
Sending a Fax
1.
Press
(FAX).
2.
Set a document in the ADF or on the document glass.
3.
Check that [Fax] is selected, and then press (OK).
4.
Check that [Add Destination] is selected, and then press (OK).
5.
Specify a destination.
Specify a destination in one of the following ways.
Selecting from the Transmission History and Reception History
6.
Change [Fax Functions] if necessary.
Memo
If you press
(START) without changing anything, the following (factory default) settings are applied for scanning and
sending a document.
[Scan Size]: A4
[Resolution]: Normal
[Density]: 0
Scanning Multiple Documents Continuously on the Document Glass (Continuous Scan (Document Glass))
Scanning Multiple Documents Continuously with the ADF (Continuous Scan (ADF))
Scanning a Duplex Document (Duplex Scan)
Specifying a Scan Resolution (Resolution)
Setting Scanning for Transmission
Erasing Edge Shadows When Sending (Edge Erase)
7.
Press
(START).
Transmission starts.
270