Oki MB472dn User Manual - page 232
Specifying the Number of Copies (Number of Copies)
1.
Insert USB Memory into the USB port.
Note
Insert USB Memory straight into the USB port. Inserting USB Memory at a wrong angle may damage the USB port.
2.
Press
(PRINT).
3.
Press to select [Print From USB Memory], and then press (OK).
4.
Check that [Select Print File] is selected, and then press (OK).
If a file to print is not saved in the folder, proceed to step 7.
5.
Press to select the folder that has the file to print, and then press (OK).
6.
Check that [Open Folder] is selected, and then press (OK).
Repeat steps 5 and 6 until the file to print is displayed.
Memo
To check the folder information, select [Folder Property].
7.
Press to select the file to print, and then press (OK).
8.
Press to select [Select a file], and then press (OK).
Memo
To check the file information, select [File Property].
9.
Press to select [Print Setup], and then press (OK).
10.
Press to select [Copies], and then press (OK).
11.
Enter the number of copies, and then press (OK).
You can enter up to 999.
12.
Press to return to the start screen.
13.
Press
(START).
Printing starts.
231