Oki MB472dn User Manual - page 634
Changing the Basic Settings from the Operator Panel (Easy Setup)
With [Easy Setup], you can change the basic settings such as the time, fax, network and e-mail functions from
(SETTING).
For details on how to enter a setting value, refer to "
1.
Press
(SETTING).
2.
Press to select [Easy Setup], and then press (OK).
3.
Enter the administrator password.
The factory default password is "aaaaaa".
4.
Select [Enter], and then press (OK).
5.
Press to select the setup menu on which you want to change a setting, and then press .
6.
Press (OK) until a message is displayed to inform you that the setting is complete.
7.
Press (OK) to complete the setup.
Memo
[---] indicates an item that cannot be reset.
To access the [Admin Setup] menu, the administrator password is required.
To cancel the setup of [Easy Setup], press (RESET/LOG OUT).
633