Oki MB472dn User Manual - page 451
Using Configuration Tool (Windows Only)
You can set Sleep mode from Configuration Tool.
Set the length of idle time before entering Sleep mode.
For details on Configuration Tool, refer to "
Using Configuration Tool (Windows only)
1.
Click [Start], and then select [All Programs] > [Okidata] > [Configuration Tool] > [Configuration Tool].
2.
Select the machine from [Registered Device Table].
3.
Click the [Device Setting] tab.
4.
Click [Menu settings].
5.
Click (Display administrator settings).
6.
Enter the administrator password, and then click [OK].
The factory default password is "aaaaaa".
7.
Click in order of [Admin Setup] > [Management] > [Power Save].
8.
Select the transition time from [Sleep Time], and then click (Save to device).
Available transition time settings
1 minute,
2 minutes,
3 minutes,
4 minutes,
5 minutes,
10 minutes,
15 minutes,
30 minutes*,
60 minutes
* indicates the factory default setting.
Topics
About Restrictions in Sleep Mode and Deep Sleep Mode
450