Oki MB472dn User Manual - page 1113
Initializing Memory
Saved e-mail templates and other data are stored in memory.
Initialize memory by following the procedure below.
Note
When you initialize memory, the following data is deleted.
The job data saved with [Secure Print], [Encrypted Secure Print] or [Store to Printer].
Custom demo data
Form data
1.
Press
(SETTING).
2.
Press to select [Admin Setup], and then press (OK).
3.
Enter the administrator password.
The factory default password is "aaaaaa".
4.
Select [Enter], and then press (OK).
5.
Press to select [Management], and then press (OK).
6.
Press to select [Flash Memory Setup], and then press (OK).
7.
Press to select memory to initialize, and then press (OK).
Memo
Select from three types of memory to initialize.
[FLASH0: Initialize]: Initializes custom and demo printing forms, and other device information.
[SD0: Initialize]: Initializes authentication print data and other print data.
[Format Partition]: Initializes user information including [SD0: Initialize].
8.
Check that [Execute] is selected, and then press (OK).
The "If executed, this machine will automatically reboot" message is displayed. Select [Yes] to continue.
1112