Oki MB472dn User Manual - page 964
Setting the Telephone Line Type to Use
[MF (Tone)/DP (Pulse)] is set to [Tone] by factory default.
For push-button type phones, if you hear a "Beep, boop, beep" sound when dialing, leave [MF (Tone)/DP (Pulse)] as [Tone].
For push-button type phones, if you do not hear a "Beep, boop, beep" sound when dialing, or if you are using a rotary-dial type
phone, set [MF (Tone)/DP (Pulse)] to [Pulse].
1.
Press
(SETTING).
2.
Press to select [Admin Setup], and then press (OK).
3.
Enter the administrator password.
The factory default password is "aaaaaa".
4.
Select [Enter], and then press (OK).
5.
Press to select [User Install], and then press (OK).
6.
Press to select [MF (Tone)/DP (Pulse)], and then press (OK).
7.
Press to select the dial type, and then press (OK).
8.
Press until the top screen is displayed.
963