Oki MB472dn User Manual - page 291
Scanning Multiple Documents Continuously with the ADF (Continuous Scan (ADF))
1.
Press
(FAX).
2.
Set a document in the ADF.
3.
Check that [Fax] is selected, and then press (OK).
4.
Press to select [Fax Functions], and then press (OK).
5.
Press to select [Continuous Scan(ADF)], and then press (OK).
6.
Press to select [ON], and then press (OK).
7.
Press until the start screen is displayed.
8.
Specify a destination.
Specify a destination in one of the following ways.
Selecting from the Transmission History and Reception History
9.
Press
(START) to start scanning the first document.
10.
When [Please set next document] is displayed, set the next document.
11.
Check that [Start Scan] is selected, and then press (OK).
12.
Repeat steps 10 and 11 for each fax transmission document if necessary.
13.
When scanning all sets of the documents is complete, press to select [Scan Complete], and then
press (OK).
14.
Press
(START).
Transmission starts.
Topics
You can cancel document scanning and transmissions.
290