Oki MB472dn User Manual - page 818
Setting Manually
1.
Press
(SETTING).
2.
Press to select [Easy Setup], and then press (OK).
3.
Enter the administrator password.
The factory default password is "aaaaaa".
4.
Select [Enter], and then press (OK).
5.
Press to select [Network Setting], and then press (OK).
6.
Check that [Manual] is selected, and then press (OK).
7.
Enter the IP address, and then press (OK).
To move to the next box, press
.
8.
Enter the subnet mask, and then press (OK).
To move to the next box, press
.
9.
Enter the default gateway address, and then press (OK).
To move to the next box, press
.
10.
Enter the DNS server and WINS server. (Be sure to enter if you use Scan to E-mail, Internet Fax, Scan
to Fax Server, or Scan to Shared Folder.)
If the DNS server and WINS server are not required for the network connection, press (OK) until the pop-up message is
displayed to inform you that the setting is complete.
11.
When the Setup Menu screen is displayed, press (OK) to complete the setup.
817