Oki MB472dn User Manual - page 580
Administrator Setup
In the following menu, you can change the settings that need the administrator authority.
Memo
To enter the [Admin Setup] menu, you need the administrator password. The factory default password is "aaaaaa".
If you change the default setting from the [Admin Setup] menu, and want to reflect the changed default on the start screen
immediately, press (RESET/LOG OUT),
(COPY),
(SCAN),
(PRINT) or
(FAX) to switch the function.
You can check and change the default settings of the copy functions for this machine.
You can check and change the default settings of the fax functions and other various basic settings.
You can check and change the default settings of the FaxServer function for this machine.
You can check and change the default settings of the Internet Fax function for this machine.
You can check and change the default settings of the scanner functions and other various basic settings.
You can check and change the default settings of the Print from USB Memory function for this machine.
You can check and change a tray configuration, print settings, and other various settings of the print functions.
You can check and change various settings for a network and servers.
You can check and change the time to reset the screen on the operator panel, Power Save mode, and other various settings related to
the machine management.
You can check and change the time zone, time, and other various default settings required for managing this machine.
579