Oki MB472dn User Manual - page 98
of
1137
Setting to Use WSD Scan
To use the Scan to PC (WSD Scan) function and the Remote Scan (WSD Scan) function via the WSD Scan connection, follow the
procedure below.
1.
Press
(SETTING).
2.
Press to select [Admin Setup], and then press (OK).
3.
Enter the administrator password.
4.
Select [Enter], and then press (OK).
5.
Press to select [Scanner Setup], and then press (OK).
6.
Press to select [WSD Scan Setup], and then press (OK).
7.
Check that [WSD Scan] is selected, and then press (OK).
8.
Press to select [Enable], and then press (OK).
9.
Press until the top screen is displayed.
97