Oki MB472dn User Manual - page 655
Setting Profiles
Importing Profiles from a File
You can register and edit profiles on this machine.
If you click
(Save to device), the changed settings are reflected to the machine.
The following section describes some functions.
Note
To use Profile Manager, install the User Setting plug-in.
About for how to install the plug-in
About profiles
About icons
Exporting Profiles to a File
1.
Click [Start], and then select [All Programs] > [Okidata] > [Configuration Tool] > [Configuration Tool].
2.
Select the machine that has the profiles you want to export from [Registered Device Table].
3.
Select the [User Setting] tab.
4.
Click [Profile Manager].
5.
Enter the administrator password, and then click [OK].
The factory default password is "aaaaaa".
6.
Click (Export to file).
7.
Enter the name of a file, select a save destination folder, and then click [Save].
Note
After exporting, the edited CSV file may not restore properly.
Importing Profiles from a File
1.
Click [Start], and then select [All Programs] > [Okidata] > [Configuration Tool] > [Configuration Tool].
2.
Select the machine to which you want to import the profiles from [Registered Device Table].
3.
Select the [User Setting] tab.
4.
Click [Profile Manager].
654