Oki MB472dn User Manual - page 405
Names and Functions
This section describes the names and functions of components on the operator panel.
No. Name
Function
1
Display
screen
Displays operation instructions and the status of the machine.
2
Status
Displays the status menu. Flashes/lights up if there is an error.
You can check the remaining amount of consumables and fax communication status.
3
Setting
Displays the machine setting menu screen.
4
REDIAL/?
HELP
Displays the Help screen. To close the screen, press
(REDIAL/?HELP), (BACK), or (RESET/LOG OUT).
You can check how to solve an error or other information.
On some screens, redials the last phone number you dialed.
5
RESET/LOG
OUT
On the top screen of each function, logs you out.
On the setting item function, resets a setting value and returns to the start screen of each function.
On the start screen of each function, returns to the top screen.
Memo
For the copy function, the top screen is the same as the start screen.
6
10-key pad Enters numbers, alphabets, and symbols.
7
SHIFT
Switches between two e-mail addresses or fax numbers that are registered in each
(ONE-TOUCH) by
pressing this button and
(ONE-TOUCH) at the same time.
8
JOB MACRO Calls settings for the copy, scan or other functions. You must register settings in advance.
Operating a Frequently-used Setting with a One-touch Key (JOB MACRO)
9
One-touch
Calls e-mail addresses or fax numbers that are frequently used for the copy, fax, or other functions. You must
register e-mail addresses and fax numbers in advance. You can register two items in each of eight buttons, a total
of 16 items.
10
QWERTY
keyboard
Enter characters. The keyboard is located under the one-touch key.
11
POWER
SAVE
Enters or exits the power saving mode.
In Power Save mode, lights up in green; In Sleep mode, flashes in green (every 3 seconds); In Deep Sleep mode,
flashes in green (every 6 seconds).
Saving Power Consumption with the Power Save Function
12
Stop
Cancels copying, fax transmissions, or other jobs.
13
Start color
Starts scanning in color.
14
Start mono
Starts copying, scanning, faxing, or printing from USB Memory in monochrome.
15
CLEAR
Executes the following operations by pressing, or pressing and holding this key according to the entry item.
Minimizes a setting value.
Enters zero in a setting value.
Clears the entry.
Clears the selected item.
16
(Scroll
right)
Proceeds to the next screen.
Moves the cursor right during item selection or character entry.
17
(Scroll
up)
Moves the cursor up during item selection or character entry.
18
(Scroll
down)
Moves the cursor down during item selection or character entry.
404