Oki MB472dn User Manual - page 22
Copying on Both Sides of Paper (Duplex Copy)
Note
Use plain paper of a standard size. Use of paper other than paper of standard sizes may cause paper jams.
About Paper Sizes, Weight, and Number of Sheets That Can be Loaded
To copy a document in your preferred orientation, specify the orientation in [Direction] in advance.
Changing the Document Orientation (Direction)
1.
Press
(COPY).
2.
Set a document in the ADF or on the document glass.
Memo
When using the document glass, Continuous Scan mode is automatically enabled. Follow the on-screen instructions.
Enabling Continuous Scan Mode (Continuous Scan)
3.
Press to display the [Change Settings] menu.
4.
Press to select [Duplex Copy], and then press (OK).
5.
Press to select a printing method, and then press (OK).
Available duplex copy settings
OFF(Simplex)*,
Simplex -> Duplex LE,
Simplex -> Duplex SE,
Duplex -> Duplex, Duplex LE -> Simplex,
Duplex SE -> Simplex
* indicates the factory default setting.
Memo
If you set [Duplex -> Duplex], you can set [Binding].
6.
Press
(START).
Copying starts.
Topics
You can change other copy settings.
Changing Settings before Copying
It is recommended to set a margin when you want to staple or punch holes in duplex copies.
Available Printing Methods
Simplex -> Duplex LE
Simplex -> Duplex SE
21