Oki MB472dn User Manual - page 518
Cannot edit at
all
The items are locked because
this machine is being set from
another computer.
Wait until setting from another computer is complete.
Alternatively, interrupt setting from another computer before
editing.
-
Cannot set the
edits to this
machine
Editing is timed out.
Set a longer time-out period for this machine before editing.
Press
(SETTING), select [Admin Setup] > [Management] >
[System Setup] > [Address Information Lock Time Out], and then
enter any period of time.
Cloning
Symptom
Cause
Solution
Reference
A copy destination device is
not displayed on the screen.
The model name of the copy destination
device is different.
Cloning functions only between the devices
with the same model name.
Check the model name of the copy
destination device.
-
If multiple devices are
specified as copy destinations,
copying cannot be made to
some of the devices.
The entered administrator password is
different from the administrator password
of the device to which copying cannot be
made.
Check the administrator password of the
device to which copying cannot be made.
-
Copying cannot be made to a
device by performing cloning
with the following functions.
E-mail Address Manager
Speed Dial Manager
Profile Manager
Network Scan Manager
Auto Delivery Manager
Information that is to be replaced in the
copy destination device is locked because it
is being edited or used.
Unlock the used information before
performing cloning.
-
If I perform cloning with Auto
Delivery Manager, the
following settings are also
copied.
E-mail Address Manager
Speed Dial Manager
Profile Manager
If e-mails or speed dials are used for the
auto delivery settings of the copy source
device, these settings also need to be
copied at the same time.
To copy only the auto delivery settings,
delete the e-mail, speed dial, or other
settings from the copy source device
before performing cloning.
-
[Alert Info] tab
Symptom
Cause
Solution
Reference
Cannot enable an alert on the [Alert
Info(Detect and notify of device
events)] screen
[Save the Log setup]
in this machine is
disabled.
Follow the procedure below:
1. Press
(SETTING), select [Admin Setup] >
[Management] > [Job Log Setup] > [Save Job Log],
and then select [Enable].
2. Click [Update device] on the [Alert Info(Detect and
notify of device events)] screen.
517