Oki MB472dn User Manual - page 717
of
1137
Adjusting the Contrast When Scanning
This section describes how to change the default setting of the contrast when scanning.
1.
Press
(SETTING).
2.
Press to select [Admin Setup], and then press (OK).
3.
Enter the administrator password.
The factory default password is "aaaaaa".
4.
Select [Enter], and then press (OK).
5.
Press to select [Scanner Setup], and then press (OK).
6.
Press to select [Default Settings], and then press (OK).
7.
Press to select [Image Settings], and then press (OK).
8.
Press to select [Contrast], and then press (OK).
9.
Press or to select a value, and then press (OK).
716