Oki MB472dn User Manual - page 126
Specifying a File Compression Rate
The available file compression rates vary depending on the selected color type.
Color type
Compression Rate
Color
High, Medium, Low*
Mono (Grayscale)
High, Medium, Low*
Mono (Binary)
High*,
Medium, Raw
* indicates the factory default setting.
Memo
Only when the color type is [Mono (Binary)], you can set the compression rate for TIFF.
1.
Press
(SCAN).
2.
Set a document in the ADF or on the document glass.
3.
Select a scan type from [Scan Menu], and then press (OK).
4.
Press to select [Scan Setting], and then press (OK).
5.
Press to select [Compression Rate], and then press (OK).
6.
Press to select a color type, and then press (OK).
7.
Press to select the encryption level, and then press (OK).
8.
Press
or
.
Scanning starts.
125