Oki MB472dn User Manual - page 323
Instructing a Fax Reception from a Telephone Remotely (Remote Switchover
Number)
If the connected telephone is remotely located, you can switch the machine to the fax reception operation by dialing the remote
switchover number on the telephone.
If the connected telephone is not a push line, press the tone button on the telephone to switch to tone (push) signals before dialing the
remote switchover number.
When dialing the remote switchover number, enter the next digit of the number within 3 seconds of dialing the previous digit.
1.
Press
(SETTING).
2.
Press to select [Admin Setup], and then press (OK).
3.
Enter the administrator password.
The factory default password is "aaaaaa".
4.
Select [Enter], and then press (OK).
5.
Press to select [Fax Setup], and then press (OK).
6.
Press to select [Fax Setting], and then press (OK).
7.
Press to select [Remote Receive Number], and then press (OK).
8.
Press to select a number, and then press (OK).
Available setting values
000, 111, 222, 333, 444, 555, 666, 777, 888, 999
9.
Press until the top screen is displayed.
322