Oki MB472dn User Manual - page 813
of
1137
Checking That Connection is Established Correctly
This section describes the procedure for checking whether a connection is established to a wireless LAN correctly with the machine.
Check by following the procedure below.
1.
Press
(SCAN).
2.
If the antenna mark is displayed at the top right of the operator panel, the connection is established
correctly.
If the wireless LAN connection is unstable
If the wireless LAN connection is unstable, read the cautions in "
Connecting to a Wireless LAN (Network Connection)
" in this manual,
and then change the positions of the machine and wireless LAN access point. If you cannot find a solution even after reading the
cautions, bring the machine and the wireless LAN access point close to each other.
812