Oki MB472dn User Manual - page 34
Specifying the Scan Resolution (Resolution)
You can change the resolution to scan a document.
1.
Press
(COPY).
2.
Set a document in the ADF or on the document glass.
3.
Press to display the [Change Settings] menu.
4.
Press to select [Image Settings], and then press (OK).
5.
Press to select [Resolution], and then press (OK).
6.
Press to select a resolution, and then press (OK).
Available resolution settings
High Speed* Normal
High Quality
* indicates the factory default setting.
Memo
[High Speed] provides quick copy. By selecting [Normal] or [High Quality], the reproduction and gray level of fine lines or
texts can be improved.
If you select the scan size of less than or equal to 177.8mm (7 inches) wide, and make copies from ADF, Scan Resolution is
changed to High Quality automatically.
7.
Press
(START).
Copying starts.
Topics
You can change other copy settings.
Changing Settings before Copying
33