Oki MB472dn User Manual - page 587
Scanner Setup
You can set the initial values of the scanner functions.
1.
Press
(SETTING).
2.
Select [Admin Setup], and then press (OK).
3.
Enter the administrator password.
The factory default password is "aaaaaa".
4.
Select [Enter], and then press (OK).
5.
Press to select [Scanner Setup], and then press (OK).
6.
Change the setting, and then press (OK).
7.
Press until the top screen is displayed.
Item
Factory
default
setting
Description
Default
Settings
Scan Size
A4 or
Letter
Sets the default scan size.
Image
Settings
Density
0
Sets the default density.
Document
Type
Text&Photo Sets the image quality of documents.
Background
Removal
Auto
Sets the default the background removal.
Resolution
200dpi
Sets the default resolution.
Contrast
0
Sets the default contrast.
Hue
0
Sets the default red-green color balance.
Saturation
0
Sets the default saturation.
RGB
R:0
G:0
B:0
Sets the default RGB contrast.
Continuous Scan
OFF
Sets whether to use Continuous Scan mode by default.
Grayscale
OFF
Sets whether to scan a monochrome document in grayscale or in black and
white by default.
File Format
Color
Selects the default file format.
[Color]/[Mono (Grayscale)] can be selected from PDF, TIFF, JPEG, and XPS.
[Mono (Binary)] can be selected from PDF, TIFF, and XPS.
Mono
(Grayscale)
Mono (Binary) PDF
Encrypted
PDF Setting
Document
Open
Password
(NULL)
Sets the default password to open an encrypted PDF. A document open
password cannot be the same as a permission password. You can enter up to
32 characters.
Permissions
Password
(NULL)
Sets the default password to control printing or editing on an encrypted PDF
file. A permission password cannot be the same as a document open
password. You can enter up to 32 characters.
Display Default
Password
Disable
Sets whether the registered password is displayed or not displayed on the
password selection screen for the document open password or permission
password.
[Disable]: Displays the registered default password using* instead of each
character.
[Enable]: Displays the registered default password as it is.
Compression
Rate
Color
Low
Selects a default compression level.
Mono
(Grayscale)
Low
586