Oki MB472dn User Manual - page 296
Adjusting the Density (Density)
You can adjust the scan density in seven levels.
1.
Press
(FAX).
2.
Set a document in the ADF or on the document glass.
3.
Check that [Fax] is selected, and then press (OK).
4.
Press to select [Fax Functions], and then press (OK).
5.
Press to select [Density], and then press (OK).
6.
Press or to select a density, and then press (OK).
Available density settings
+3, +2, +1, 0*,
-1,
-2,
-3
* indicates the factory default setting.
Memo
[0] is the standard value. To increase the density, select [+1], [+2], or [+3] (darkest). To decrease the density, select [-1], [-
2], or [-3] (lightest).
7.
Press until the start screen is displayed.
8.
Specify a destination.
Specify a destination in one of the following ways.
Selecting from the Transmission History and Reception History
9.
Press
(START).
Transmission starts.
Topics
You can change other settings for fax transmissions.
Setting Scanning for Transmission
295