Oki MB472dn User Manual - page 582
Fax Setup
Set the default settings of the fax functions and the fax server functions.
1.
Press
(SETTING).
2.
Select [Admin Setup], and then press (OK).
3.
Enter the administrator password.
The factory default password is "aaaaaa".
4.
Select [Enter], and then press (OK).
5.
Press to select [Fax Setup], and then press (OK).
6.
Change the setting, and then press (OK).
7.
Press until the top screen is displayed.
Item
Factory
default
setting
Description
Default
Settings
Resolution
Normal
Sets the default image quality.
Density
0
Sets the default density to scan.
Scan Size
A4 or Letter
Sets the default scan size.
Continuous Scan(Document Glass)
OFF
Sets whether to use Continuous Scan.
Continuous Scan(ADF)
OFF
Edge Erase
Setting
OFF
Sets whether to erase the edge shadow created on Fax scan
image.
Width
2 mm (0.1
inch)
Sets an erasing width created on Fax scan image.
TTI
ON
Sets whether to add the sender's name to the header of the sent
fax by default.
Transmit Confirmation Report
OFF or ON
Sets whether to automatically print transmission results by
default.
Memory Tx
ON
Sets whether to use memory transmission (ON) or real-time
transmission (OFF) by default.
Fcode
Box
Edit/Register Confidential
Box
Box Name
(NULL)
Sets the name for confidential boxes. You can enter up to
16 characters.
Sub-Address (NULL)
Sets the sub-address for confidential box. You can enter up to
20 characters.
Hold Time
0
Sets the hold time for confidential box.
Available range: 0 to 31 days
I.D.Code
(NULL)
Sets the password for confidential box. Register a 4-digit
numerical number only.
Bulletin
Box
Box Name
(NULL)
Sets a bulletin box name. You can enter up to 16 characters.
Sub-Address (NULL)
Sets the sub-address for bulletin box. You can enter up to
20 characters.
Delete
Deletes an Fcode box.
Security
Function
ID Check Tx
OFF
Sets whether to use the ID check transmission.
Broadcast Destination
ON
Sets whether to indicate the transmission destination number
before starting broadcast transmission.
Confirm Dial
OFF
Sets whether to reenter the transmission destination fax number
before sending a fax.
Secure Receive
Setting
OFF
Sets whether to store a received fax in the memory of this
machine without printing immediately.
Password
(NULL)
Sets the password that is entered when printing a received fax
581