Oki MB472dn User Manual - page 73
Registering a Computer That is Connected
You can register a computer on the same network as a scanning destination.
1.
Press
(SETTING).
2.
Press to select [Network Scan Destination], and then press (OK).
3.
Press to select a number, and then press (OK).
4.
Check that [Register] is selected, and then press (OK).
To edit a registered group number, select [Edit].
5.
Check that [Destination] is selected, and then press .
6.
Enter a destination.
You can enter up to 16 characters.
7.
Select [Enter], and then press (OK).
8.
Press to select [Destination Address], and then press .
9.
Enter an IP address, host name, or computer name.
You can enter up to 64 characters.
10.
Select [Enter], and then press (OK).
11.
Press to select [Port No.], and then press .
12.
Enter a port number, and then press (OK).
13.
Press (OK).
14.
Press until the top screen is displayed.
72