Oki MB472dn User Manual - page 444
Saving Power Consumption with the Power Save Function
The machine has three Power Save modes: Power Save, Sleep, and Deep Sleep.
If you do not use the machine for a certain period of time, the machine automatically enters Power Save mode, saving power
consumption. Alternatively, you can switch the machine to Power Save mode by pressing (POWER SAVE).
The procedures for switching the machine to each mode and conditions to exit each mode are shown in the table below.
Power
Save
mode
Procedure for switching
the machine to each
mode
Condition to
switch to
each mode
Machine status
Condition to exit each mode
Power
Save
mode
After a certain period of
time passes*
1
, or press
(POWER SAVE)
-
The backlight on the operator panel
turns off. (POWER SAVE) lights up in
green.
Press a button on the operator panel.
Print data, a fax, or other data is
received.
Sleep
mode
After a certain period of
time passes
*2
A certain
function
*3
is
enabled.
The screen on the operator panel turns
off. (POWER SAVE) flashes in green
(every 3 seconds).
Press (POWER SAVE). Print data,
a fax, or other data is received.
Deep
Sleep
mode
After a certain period of
time passes
*2
A certain
function
*3
is
disabled.
The screen on the operator panel turns
off. (POWER SAVE) flashes in green
(every 6 seconds).
Same conditions as Sleep mode are
applied or there are restrictions to
exit Deep Sleep
*4
.
*1
If the machine idles for a certain period of time (1 minute by factory default), the machine automatically enters Power Save mode.
To change the time to enter Power Save mode, refer to "
*2
If the machine idles for a certain period of time (30 minutes by factory default) in Power Save mode, the machine automatically
enters Sleep mode or Deep Sleep mode. To change the time to enter Sleep mode or Deep Sleep mode, refer to "
".
*3
For details on the applicable function, refer to "
".
*4
For details on the restrictions, refer to "
About Restrictions in Sleep Mode and Deep Sleep Mode
This section describes how to set Power Save mode.
This section describes how to set Sleep mode and exit Sleep mode to the standby status.
About Restrictions in Sleep Mode and Deep Sleep Mode
This section describes about the restrictions that occur to the network when this machine enters Sleep Mode or Deep Sleep Mode.
443