Oki MB472dn User Manual - page 657
Setting a Network Scan
Exporting Network Scan Settings to a File
Importing Network Scan Settings from a File
Deleting Network Scan Settings
You can register and edit an address to use for network scans.
If you click
(Save to device), the changed settings are reflected to the machine.
About icons
Exporting Network Scan Settings to a File
1.
Click [Start], and then select [All Programs] > [Okidata] > [Configuration Tool] > [Configuration Tool].
2.
Select the machine that has the network scan settings you want to export from [Registered Device
Table].
3.
Select the [User Setting] tab.
4.
Click [Network Scan Manager].
5.
Enter the administrator password, and then click [OK].
The factory default password is "aaaaaa".
6.
Click (Export to file).
7.
Enter the name of a file, select a save destination folder, and then click [Save].
Note
After exporting, the edited CSV file may not restore properly.
Importing Network Scan Settings from a File
1.
Click [Start], and then select [All Programs] > [Okidata] > [Configuration Tool] > [Configuration Tool].
2.
Select the machine to which you want to import the network scan settings from [Registered Device
Table].
3.
Select the [User Setting] tab.
4.
Click [Network Scan Manager].
5.
Enter the administrator password, and then click [OK].
The factory default password is "aaaaaa".
6.
Click (Import from file).
7.
Select the file to import, and then click [Open].
8.
Select the settings to import, and then click [Import].
9.
Click (Save to device).
Deleting Network Scan Settings
1.
Click [Start], and then select [All Programs] > [Okidata] > [Configuration Tool] > [Configuration Tool].
656