Oki MB472dn User Manual - page 282
Using Direct Entry
You can directly enter a destination fax number by using the 10-key pad.
Memo
Specify a destination in step 5 in "
1.
Press to select [Direct Input], and then press (OK).
2.
Enter a destination fax number by using the 10-key pad.
You can enter up to 40 digits.
Memo
You can enter a destination by using the 10-key pad on the screen that is displayed after pressing
(FAX). In such a case,
the start screen is displayed after entering a destination, and you can set scanning for transmissions.
3.
Select [Enter], and then press (OK).
About the Dial Function
When entering a destination fax number, you can use the following functions.
"-", "Prefix", and "Flash"
Select a sign on the fax number entry screen, and then press (OK) to enter.
- (Hyphen)
Inserts a hyphen to the entered fax number.
Prefix
Inserts a prefix number that is registered in advance. "N" is inserted when entering.
Flash
Orders your PBX (Private Branch Exchange) to connect you with PSTN (Public Switched Telephone Network). "F" is inserted when
entering.
"Pause", "#"
Enter with the < # > key on the 10-key pad. Pressing the < # > key switches between "P" and "#".
Pause
Pauses 2 seconds when dialing. You can enter pauses as many as you want. "P" is inserted when entering.
# (Pound)
Sends "#" to the telephone line if [MF(Tone)/DP(Pulse)] is set to [Tone]. "#" is inserted when entering.
"Tone", "*"
Enter with the < * > key on the 10-key pad. Pressing the < * > key switches between "T" and "*".
Tone
Switches to tone dialing if [MF(Tone)/DP(Pulse)] is set to [Pulse]. "T" is inserted when entering.
* (Asterisk)
Sends "*" to the telephone line if [MF(Tone)/DP(Pulse)] is set to [Tone]. "*" is inserted when entering.
Topics
Specifying a destination in other methods
281