Oki MB472dn User Manual - page 1038
Changing the Initial Value of Each Function
You can change settings that require administrator rights on the following menus.
"Copy Function"
"Fax Function"
"FaxServer Function"
"Internet Fax Function"
"Scanner Function"
"USB Memory Print Function"
"Printer Function"
"Network"
"Management"
"Operation Initial Setting"
1.
Press
(SETTING).
2.
Press to select [Easy Setup], and then press (OK).
3.
Enter the administrator password.
The factory default password is "aaaaaa".
4.
Select [Enter], and then press (OK).
5.
Press to select the menus on which you want to change the settings, and then press .
6.
Change the settings, and then press (OK).
In the case of [Easy Setup], repeat step 6 until a message indicating the setting is complete is displayed.
Memo
If you have made a change to initial values from the [Admin Setup] menu and wants to reflect the new values immediately on the
Start screen, press (RESET/LOG OUT) or press one of the following function switch buttons,
(COPY)
(SCAN),
(PRINT), or
(FAX).
1037