Oki MB472dn User Manual - page 693
IP Filtering
Item
Factory
default
setting
Description
Web page
Configuration
Tool
(Windows)
Network
Card Setup
(Mac OS X)
Network
Setting Plug-
in
IP Filtering
-
-
Disable
Specifies whether to use IP filtering. Be sure to configure the following
settings of this category when you enable IP filtering. If you do not, you
cannot access this machine via TCP/IP.
Memo
If IP filtering is enabled, IPv6 communication is not available.
Start Address
1-10
-
-
0.0.0.0
Specifies IP addresses that are allowed to access this machine. You can
specify an individual address or an address range.
End Address
1-10
-
-
0.0.0.0
Printing 1-10
-
-
Disable
Specifies whether to allow print jobs from specified IP addresses.
Configuration
1-10
-
-
Disable
Specifies whether to allow settings changes from specified IP addresses.
Administrator's
IP Address
setting
-
-
0.0.0.0
Specifies the administrator IP address automatically. Only this address can
always access the machine.
When the administrator accesses this machine via a proxy server, all access
via the proxy server is allowed.
692