Oki MB472dn User Manual - page 392
of
1137
Enabling the Scan to Fax Server Function
To enable the Scan to Fax Server function, follow the procedure below in Admin Setup.
Note
If the Scan to Fax Server function is enabled, the fax function is disabled.
1.
Press
(SETTING).
2.
Press to select [Admin Setup], and then press (OK).
3.
Enter the administrator password.
The factory default password is "aaaaaa".
4.
Select [Enter], and then press (OK).
5.
Press to select [FaxServer Function], and then press (OK).
6.
Press to select [Environmental Settings], and then press (OK).
7.
Press to select [FaxServer Function], and then press (OK).
8.
Select [ON], and then press (OK).
9.
Restart the machine.
391