Oki MB472dn User Manual - page 300
Printing Transmission Results Automatically (Transmit Confirmation Report)
Set whether to automatically print transmission results.
Memo
To change the default value, change it from [Admin Setup] > [Fax Setup] > [Default Settings] > [Transmit Confirmation Report].
1.
Press
(FAX).
2.
Set a document in the ADF or on the document glass.
3.
Check that [Fax] is selected, and then press (OK).
4.
Press to select [Fax Functions], and then press (OK).
5.
Press to select [Transmit Confirmation Report], and then press (OK).
6.
Press to select [ON], and then press (OK).
7.
Press until the start screen is displayed.
8.
Specify a destination.
Specify a destination in one of the following ways.
Selecting from the Transmission History and Reception History
9.
Press
(START).
Transmission starts.
Topics
You can change other settings for fax transmissions.
Setting Scanning for Transmission
299