Oce CS2436 User Manual - Pausing Printing
Basic Printing Workflow (CS2436-1)
1. 3. 1.
Basic Printing Workflow > Pausing Printing >
Pausing Printing
During printing, if you set
Pause Print
in the Control Panel menu to
On
, printing is stopped at that point
and the printer enters a state in which printing is paused. (See "Control Panel Display (
8.2.3
).")
Printing from the job queue is not possible in this state.
To restore normal operation after this state, set
Pause Print
to
Off
.
Note
・
In the following cases, the status is cleared even if you do not set
Pause Print
to
Off
, and printing from the job queue resumes.
・
When paper is advanced
・
When you execute
Chg. Paper Type
in the
Paper Menu
1.
During printing, on the
Tab Selection screen
of the Control Panel, press or to select the
Job tab (
).
Note
・
If the
Tab Selection screen
is not displayed, press the
Menu
button.
2.
Press the
OK
button.
The
Job Menu
is displayed.
3.
Press or to select
Pause Print
, and then press the
OK
button.
4.
Press or to select
On
or
Off
, and then press the
OK
button.
file:///H|/ITC-dd/Projects/Ud/WFPS/oostende%205/...port/iPF750%20User%20Manual/lang/print/cp01.html (27 of 27) [4-3-2010 11:35:33]