Oce CS2436 User Manual - page 603
Network Setting (CS2436-9)
9. 3. 3.
Network Setting > Network Setting (Mac OS X) >
Configuring the Destination for AppleTalk Networks
To print over an AppleTalk network, activate the AppleTalk protocol and configure the destination
as follows.
Activating AppleTalk on the printer
Important
・
By factory default, the AppleTalk protocol is disabled on the printer.
1.
On the
Tab Selection screen
of the Control Panel, press or to select the Settings/
Adj. tab (
).
Note
・
If the
Tab Selection screen
is not displayed, press the
Menu
button.
2.
Press the
OK
button.
The
Set./Adj. Menu
is displayed.
3.
Press or to select
Interface Setup
, and then press the
OK
button.
4.
Press or to select
AppleTalk
, and then press the
OK
button.
5.
Press or to select
On
, and then press the
OK
button.
6.
Press the
Menu
button.
If any of the settings is changed, a confirmation message is displayed. In this case, press
the
OK
button.
3]
file:///H|/ITC-dd/Projects/Ud/WFPS/oostende%205/...port/iPF750%20User%20Manual/lang/print/cp06.html (53 of 60) [4-3-2010 11:37:0