Oce CS2436 User Manual - page 580
Network Setting (CS2436-9)
9. 1. 14.
Network Setting > Network Setting >
Initializing the Network Settings
Use RemoteUI to restore the network settings to the default values as follows.
Important
・
Initializing the network settings will also restore the default value of the
printer's IP address. As a result, the RemoteUI page cannot be displayed in
the web browser after this procedure.
・
For instructions on reconfiguring the IP address, see "Configuring the IP
Address on the Printer (
9.1.2
)."
・
For details on RemoteUI, see "Using RemoteUI (
9.1.7
)."
1.
Start the web browser and enter the following URL in the
Location
(or
Address
) box to
display the RemoteUI page.
http://
printer IP address or name
/
Example: http://xxx.xxx.xxx.xxx/
2.
Select
Administrator Mode
and click
Logon
.
3.
If a password has been set on the printer, enter the password.
4.
Click
Network
in the
Device Manager
menu at left to display the
Network
page.
5.
Click
Reset to Default settings
in the lower-right corner of the
Network Interface
group.
6.
After confirming the message, click
OK
to restore the network settings to the default values.
Note
・
You can also use Device Setup Utility or the Control Panel to restore the
default network settings.
3]
file:///H|/ITC-dd/Projects/Ud/WFPS/oostende%205/...port/iPF750%20User%20Manual/lang/print/cp06.html (30 of 60) [4-3-2010 11:37:0