Oce CS2436 User Manual - Specifying The Paper Length
Handling Paper (CS2436-6)
6. 2. 4.
Handling Paper > Handling rolls >
Specifying the Paper Length
When changing the length of paper after the paper has been advanced, specify the length as follows.
Note
･
Specify the paper length when you have set
ManageRemainRoll
to
On
. (See "Keeping
Track of the Amount of Roll Paper Left (
6.2.11
).")
1.
On the
Tab Selection screen
of the Control Panel, press or to select the Paper tab (
).
Note
･
If the
Tab Selection screen
is not displayed, press the
Menu
button.
2.
Press the
OK
button.
The
Paper Menu
is displayed.
3.
Press or to select
Chg. Paper Size
, and then press the
OK
button.
4.
Press or to select
Roll Length
, and then press the
OK
button.
5.
Press or to select the length of paper loaded in the printer, and then press the
OK
button.
Specify the roll length as follows.
1.
Press the or button to move to the next field for input.
2.
Press the or button to enter the value.
3.
Repeat steps 1 and 2 to finish entering the value, and then press the
OK
button.
file:///H|/ITC-dd/Projects/Ud/WFPS/oostende%205/...port/iPF750%20User%20Manual/lang/print/cp04.html (16 of 63) [4-3-2010 11:36:31]