Oce CS2436 User Manual - Checking For Nozzle Clogging
Maintenance (CS2436-10)
10. 2. 2.
Maintenance > Printheads >
Checking for Nozzle Clogging
If printing is faint or affected by banding in different colors, make sure the Printhead nozzles are
clear by printing a test pattern to check the nozzles.
Note
・
Nozzles are periodically checked to ensure they are clear. Configure the
settings on the Control Panel menu in
Nozzle Check
. (See "Menu
Settings (
8.2.8
).")
1.
Load unused paper.
●
Attaching the Roll Holder to Rolls (
6.2.1
)
●
Loading Rolls in the Printer (
6.2.2
)
●
Loading Sheets in the Printer (
6.3.1
)
2.
On the
Tab Selection screen
of the Control Panel, press or to select the Settings/
Adj. tab (
).
Note
・
If the
Tab Selection screen
is not displayed, press the
Menu
button.
3.
Press the
OK
button.
The
Set./Adj. Menu
is displayed.
4.
Press or to select
Test Print
, and then press the
OK
button.
5.
Press or to select
Nozzle Check
, and then press the
OK
button.
The printer now prints a test pattern for checking the nozzles.
6.
Check the printing results.
If the horizontal lines are not faint or incomplete, the nozzles are clear.
1]
file:///H|/ITC-dd/Projects/Ud/WFPS/oostende%205/...port/iPF750%20User%20Manual/lang/print/cp07.html (13 of 48) [4-3-2010 11:37:1