Oce CS2436 User Manual - page 564
Network Setting (CS2436-9)
9. 1. 8.
Network Setting > Network Setting >
Configuring the Printer's TCP/IP Network Settings
Follow the steps below to configure the TCP/IP network settings.
When using an IPv4 IP address
1.
Start the web browser and enter the following URL in the
Location
(or
Address
) box to
display the RemoteUI page.
http://
printer IP address or name
/
Example: http://xxx.xxx.xxx.xxx/
2.
Select
Administrator Mode
and click
Logon
.
3.
If a password has been set on the printer, enter the password.
4.
Click
Network
in the
Device Manager
menu at left to display the
Network
page.
5.
Click
Edit
in the upper-right corner of the
TCP/IPv4
group to display the
Edit TCP/IP
Protocol Settings
page.
6.
Refer to the TCP/IP Settings Items table to complete the settings.
TCP/IP Settings Items
Item
Details
Default Setting
Use DHCP
Activate this setting to
use DHCP for
configuring the IP
address.
Off
Use BOOTP
Activate this setting to
use BOOTP for
configuring the IP
address.
Off
Use RARP
Activate this setting to
use RARP for
configuring the IP
address.
Off
Enable DNS
Dynamic Update
Activate this setting to
perform DNS server
registration
automatically.
Off
Use Zeroconf
Function
Activate this setting to
use Bonjour.
On
3]
file:///H|/ITC-dd/Projects/Ud/WFPS/oostende%205/...port/iPF750%20User%20Manual/lang/print/cp06.html (14 of 60) [4-3-2010 11:37:0