Oce CS2436 User Manual - Changing The Type of Paper
Handling Paper (CS2436-6)
6. 2. 3.
Handling Paper > Handling rolls >
Changing the Type of Paper
Follow these steps to change the type of paper specified on the printer after you have loaded paper.
If you will continue using this type of paper later, selecting
Keep Paper Type
>
On
will save the time and effort
of configuring the media type setting when you load the paper again. The current media type settings before you
select
On
will be automatically selected at that time. (See "
Using the Same Type of Paper Regularly
.")
Important
・
For best printing results, the printer fine-tunes the feed amount for each type of paper.
Be sure to select the type of paper to use correctly before printing.
・
Because the printer fine-tunes the feed amount for each type of paper, the margins and
the size of printed images may vary depending on the type of paper used. If margins and
the size of images are not as you expected, adjust the paper feed amount.
(See "Adjusting the Feed Amount (
7.2.1
).")
Changing the Type of Paper
Note
・
After you load a roll, the printer automatically shows a menu for selection of the type of
paper on the Display Screen. Select the type of paper and press the
OK
button.
If no barcode has been printed on the roll and you have set
ManageRemainRoll
to
On
,
specify the roll length after the type of paper. (See "Specifying the Paper Length (
6.2.4
).")
1.
On the
Tab Selection screen
of the Control Panel, press or to select the Paper tab (
).
Note
・
If the
Tab Selection screen
is not displayed, press the
Menu
button.
2.
Press the
OK
button.
The
Paper Menu
is displayed.
3.
Press or to select
Chg. Paper Type
, and then press the
OK
button.
4.
Press or to select the type of paper loaded (
Roll Paper
or
Cut Sheet
), and then press the
OK
button.
5.
Press or to select the type of paper loaded in the printer, and then press the
OK
button.
Note
file:///H|/ITC-dd/Projects/Ud/WFPS/oostende%205/...port/iPF750%20User%20Manual/lang/print/cp04.html (14 of 63) [4-3-2010 11:36:31]