Oce CS2436 User Manual - page 472
Adjustments for Better Print Quality (CS2436-7)
・
When printing on special paper, or if printing is not improved after
Auto
(Advanced)
, try
Manual
.
(See "Manual Adjustment to Straighten Lines and Colors (Head Posi.
Adj.) (
7.1.3
).")
・
Use
Auto(Standard)
if you have switched to another type of paper or if
you want the boundaries between colors to appear as clear as possible.
・
Use
Auto(Advanced)
to fine-tune the space between nozzles or colors if
you have switched the printhead or if clearer printing is required. We
recommend
Auto(Advanced)
for printing at the highest level of quality.
・
We recommend using the type of paper you use most often for adjustment.
Paper to Prepare
Rolls
An unused roll at least 10 inches wide
Sheets
Auto(Standard)
: One sheet of unused paper of at least A4/
Letter size
Auto(Advanced)
: Five sheets of unused paper of at least A4/
Letter size (or one sheet when using A2 or larger)
Perform adjustment as follows.
1.
Load the paper.
●
Attaching the Roll Holder to Rolls (
6.2.1
)
●
Loading Rolls in the Printer (
6.2.2
)
●
Loading Sheets in the Printer (
6.3.1
)
2.
On the
Tab Selection screen
of the Control Panel, press or to select the Settings/
Adj. tab (
).
Note
・
If the
Tab Selection screen
is not displayed, press the
Menu
button.
3.
Press the
OK
button.
The
Set./Adj. Menu
is displayed.
file:///H|/ITC-dd/Projects/Ud/WFPS/oostende%205/...port/iPF750%20User%20Manual/lang/print/cp70.html (4 of 25) [4-3-2010 11:36:36]