Oce CS2436 User Manual - page 628
Maintenance (CS2436-10)
・
Prepare a new Ink Tank when ink levels are low.
・
Your hands may become dirty during Printhead replacement. Use the gloves
provided with the new Printhead for replacement.
1.
If the roll is not ejected because of the cutting method selected, cut it manually and
remove it. (See "Cutting Roll Paper After Printing (
3.12.9
).")
2.
Clean inside the Top Cover. (See "Cleaning Inside the Top Cover (
10.4.2
).")
3.
On the
Tab Selection screen
of the Control Panel, press or to select the Settings/
Adj. tab (
).
Note
・
If the
Tab Selection screen
is not displayed, press the
Menu
button.
4.
Press the
OK
button.
The
Set./Adj. Menu
is displayed.
5.
Press or to select
Maintenance
, and then press the
OK
button.
6.
Press or to select
Replace P.head
, and then press the
OK
button.
Ink is now filled.
After about two minutes, a message is shown on the Display Screen instructing you to open
the Top Cover.
Replace the Printhead
1.
Open the Top Cover.
1]
file:///H|/ITC-dd/Projects/Ud/WFPS/oostende%205/...port/iPF750%20User%20Manual/lang/print/cp07.html (18 of 48) [4-3-2010 11:37:1