Oce CS2436 User Manual - page 601
Network Setting (CS2436-9)
9. 3. 2.
Network Setting > Network Setting (Mac OS X) >
Configuring the Printer's AppleTalk Network Settings
Follow the steps below to configure the AppleTalk network settings.
1.
Start the web browser and enter the following URL in the
Location
(or
Address
) box to
display the RemoteUI page.
http://
printer IP address or name
/
Example: http://xxx.xxx.xxx.xxx/
2.
Select
Administrator Mode
and click
Logon
.
3.
If a password has been set on the printer, enter the password.
4.
Click
Network
in the
Device Manager
menu at left to display the
Network
page.
5.
Click
Edit
in the upper-right corner of the
AppleTalk
group to display the
Edit AppleTalk
Protocol Settings
page.
6.
Refer to the AppleTalk Settings Items table to complete the settings.
AppleTalk Settings Items
Item
Details
Default Setting
Phase Type
Specify whether to use
AppleTalk.
If you will use AppleTalk,
choose
Phase 2
.
If you will not use AppleTalk,
choose
Disabled
.
Disabled
Name
(*1)
Specify the object name used
by AppleTalk (in up to 31
single-byte or 15 double-byte
characters).
However, do not use the
following single-byte
characters: @, *, :, and =.
Océ NB-18GB (xxxxxx)
Zone
(*2)
Specify the printer zone
name, up to 31 single-byte
characters.
However, do not use the
following single-byte
characters: Also avoid using
*
(which represents the default
zone) in the middle of a
string.
*
3]
file:///H|/ITC-dd/Projects/Ud/WFPS/oostende%205/...port/iPF750%20User%20Manual/lang/print/cp06.html (51 of 60) [4-3-2010 11:37:0