Oce CS2436 User Manual - page 555
Network Setting (CS2436-9)
9. 1. 2.
Network Setting > Network Setting >
Configuring the IP Address on the Printer
You must configure the printer's IP address before using the printer in a TCP/IP network.
The printer's IP address is configured automatically when you install the printer driver following
the instructions in the Setup Guide.
Configure the IP address by using Device Setup Utility, the printer Control Panel, or ARP or PING
commands, if the IP address is changed, or if you change the printer connection mode to a
network connection. For details on configuring the IP address, refer to the following topics.
●
Configuring the IP Address Using Device Setup Utility (
9.1.3
) (Windows)
●
Configuring the IP Address Using the Printer Control Panel (
9.1.4
)
●
Configuring the IP Address Using ARP and PING Commands (
9.1.5
)
Important
・
If you use a DHCP server for automatic assignment of the printer's IP
address, printing may no longer be possible after the printer is turned off and
on. This is because an IP address different from before has been assigned.
Thus, when using DHCP server functions, consult your network administrator
and configure the settings in one of the following ways.
・
Configure the setting for dynamic DNS updating
In RemoteUI, activate the setting
Enable DNS Dynamic Update
. (See
"Configuring the Printer's TCP/IP Network Settings (
9.1.8
).")
・
Configure the setting for assignment of the same IP address each time
the printer starts up
Note
・
We recommend configuring the printer's IP address even if you will use the
printer in networks other than TCP/IP networks. Configuring the printer's IP
address enables you to use RemoteUI to configure the network settings and
manage the printer with a web browser.
For details on RemoteUI, see "Using RemoteUI (
9.1.7
)."
]
file:///H|/ITC-dd/Projects/Ud/WFPS/oostende%205/...port/iPF750%20User%20Manual/lang/print/cp06.html (5 of 60) [4-3-2010 11:37:03