Oce CS2436 User Manual - page 696
Troubleshooting (CS2436-11)
11. 5. 5.
Troubleshooting > Problems with the printing quality >
The back side of the paper is dirty
Cause
Corrective Action
The Platen has become
dirty after borderless
printing or printing on
small paper.
Open the Top Cover and clean the Platen.
(See "Cleaning Inside the Top
Cover (
10.4.2
).")
The Platen has become
soiled because you have
set
Width Detection
to
Off
in the Control Panel
menu.
Set
Width Detection
to
On
in the Control
Panel menu, and then open the Top Cover
and clean the Platen.
(See "Cleaning Inside the Top
Cover (
10.4.2
).")
Open the Top Cover and clean the Platen.
After this, manually advance the roll onto the
Platen before printing.
(See "Cleaning Inside the Top
Cover (
10.4.2
).")
(See "Feeding Roll Paper Manually (
6.2.10
).")
The Paper Retainer is
soiled.
Clean the Paper Retainer.
(See "Cleaning Inside the Top
Cover (
10.4.2
).")
2]
file:///H|/ITC-dd/Projects/Ud/WFPS/oostende%205/...port/iPF750%20User%20Manual/lang/print/cp08.html (38 of 75) [4-3-2010 11:37:2