Oce CS2436 User Manual - Cannot Adjust Printhead.
Error Message (CS2436-12)
12. 4. 1.
Error Message > Messages regarding printing or adjustment >
Cannot adjust printhead.
Cause
Corrective Action
The Printhead nozzles
are clogged.
Execute
Head Posi. Adj.
again, as follows.
1.
Press the
OK
button to clear the error.
2.
Print a test pattern to check the nozzles.
(See "Checking for Nozzle
Clogging (
10.2.2
).")
3.
Clean the Printhead if the nozzles are
clogged.
(See "Cleaning the Printhead (
10.2.3
).")
4.
Execute
Head Posi. Adj.
again.
(See "Automatic Adjustment to Straighten
Lines and Colors (Head Posi. Adj.) (
7.1.2
).")
The Printhead cannot
be aligned; highly
transparent film is
loaded.
Press the
OK
button to clear the error.
We recommend using a type of paper that you
often use, other than film, for Printhead
adjustment.
(See "Automatic Adjustment to Straighten Lines
and Colors (Head Posi. Adj.) (
7.1.2
).")
The Printhead is
installed crooked.
Straighten the Printhead as follows, and then
execute
Head Posi. Adj.
again.
1.
Press the
OK
button to clear the error.
2.
Use
Head Inc. Adj.
to adjust the angle
of inclination of the Printhead.
(See "Adjusting Line Misalignment (Head
Inc. Adj.) (
7.1.4
).")
3.
Execute
Head Posi. Adj.
again.
(See "Automatic Adjustment to Straighten
Lines and Colors (Head Posi. Adj.) (
7.1.2
).")
file:///H|/ITC-dd/Projects/Ud/WFPS/oostende%205...ort/iPF750%20User%20Manual/lang/print/cp10.html (107 of 133) [4-3-2010 11:37:38]