Oce CS2436 User Manual - page 712
Troubleshooting (CS2436-11)
11. 6. 3.
Troubleshooting > Cannot print over a network >
Cannot print over a NetWare network
Cause
Corrective Action
The printer's NetWare
settings are not configured
correctly.
Make sure the printer's NetWare settings are
configured correctly. In particular, make sure
a valid frame type is selected.
(See "Configuring the Printer's NetWare
Network Settings (
9.2.3
).")
The computer you are
trying to print from is not
configured correctly.
Make sure the computer's NetWare settings
are configured correctly.
(See "Configuring NetWare Network
Settings (
9.2.7
).")
The NetWare server and
services are not configured
correctly.
Check the following points.
1.
Make sure the NetWare file server is
running.
2.
Make sure there is enough free disk
space on the NetWare file server.
Insufficient disk space may prevent you
from processing large print jobs.
3.
Start NWADMIN or PCONSOLE and
confirm that the print service is
configured correctly and the print queue
is available.
4.
If data transmission to a printer on
another subnet fails, deactivate NCP burst
mode in that printer's network protocol
settings.
5.
If the printer is used in queue server
mode, specify
Other/Unknown
as the
printer type.
2]
file:///H|/ITC-dd/Projects/Ud/WFPS/oostende%205/...port/iPF750%20User%20Manual/lang/print/cp08.html (54 of 75) [4-3-2010 11:37:2