Oce CS2436 User Manual - page 443
Handling Paper (CS2436-6)
want to cut the roll
edge after loading a
roll.
Note
・
Automatic and Eject are valid only when you have selected
Auto Cut
>
Yes
in the printer
driver.
・
With Eject, printing does not resume after a series of jobs have been printed
continuously until the roll is cut.
・
Eject
is the preset selection in
Cutting Mode
for some types of paper. For this paper,
we recommend keeping the preset cutting mode.
Cut rolls manually in the following cases:
Eject (waiting for ink to dry after printing)
Important
・
When cutting wide printed documents after ejection, have two people support the
documents. If the paper drops, printed documents may be damaged.
・
Do not lift the paper when holding printed documents before cutting. If the paper rises, it
may affect the printing quality or cause rough cut edges.
1.
On the
Tab Selection screen
of the Control Panel, press or to select the Paper tab (
).
Note
・
If the
Tab Selection screen
is not displayed, press the
Menu
button.
file:///H|/ITC-dd/Projects/Ud/WFPS/oostende%205/...port/iPF750%20User%20Manual/lang/print/cp04.html (38 of 63) [4-3-2010 11:36:31]