Oce CS2436 User Manual - page 535
Printer Parts (CS2436-8)
Setup
Keep Paper Size
Choose
On
to use the paper size
setting as the basis for printing
instead of other settings. The margin
setting of the printer menu will be
used instead of the margin setting of
the printer driver if the latter is
smaller, which may prevent text or
images in the margin from being
printed.
Choose
Off
to give priority to margin
settings. The larger value is used if
the margin specified in the printer
driver does not match the margin in
the printer menu
TrimEdge Reload
Specify whether to trim the leading
edge of the currently retracted roll
when the roll is advanced. Cut the
edge if you are concerned about any
marks left on the roll when the roll is
left in the retracted position.
Specify
On
to have rolls cut when
printing begins after Sleep mode or
when the power is restored. Selecting
Automatic
will trim the edge when
the roll has been in the retracted
position for two days or more.
Rep.P.head Print
Choose
On
to have the printer
automatically execute the
Advanced
Adj.
operations after you replace the
Printhead. (See "Automatic
Adjustment to Straighten Lines and
Colors (Head Posi. Adj.) (
7.1.2
).")
Nozzle Check
In
Frequency
, specify the timing for
automatic checks of nozzle clogging.
Choose
Standard
to have the printer
adjust the timing for checks based on
the frequency of nozzle use. Choose
1
page
to check once per page.
Select
Warning
>
On
to display
warnings if the nozzles clog during
printing.
Use RemoteUI
Choosing
Off
prohibits access from
RemoteUI. Settings can only be
configured from the control panel.
Reset PaprSetngs
Restores settings that you have
changed to the default values.
1]
file:///H|/ITC-dd/Projects/Ud/WFPS/oostende%205/...port/iPF750%20User%20Manual/lang/print/cp05.html (42 of 57) [4-3-2010 11:36:5