Oce CS2436 User Manual - Checking Ink Tank Levels
Maintenance (CS2436-10)
10. 1. 3.
Maintenance > Ink Tanks >
Checking Ink Tank Levels
On the Display Screen, you can check how much ink is left in the ink tanks.
To check remaining Ink Tank levels, access the
Tab Selection screen
on the Control Panel and
press or to select the Ink tab (
).
Note
・
If the
Tab Selection screen
is not displayed, press the
Menu
button.
・
If an error has occurred and the
Tab Selection screen
cannot be
displayed, display
Ink Info
as follows.
1.
Press the
OK
button to display
Printer Info
.
2.
Press the or button to select
Ink Info
.
3.
Press the
OK
button.
The remaining ink levels shown on the Display Screen correspond to the inks identified by the
Color Label on the bottom of the Display Screen.
These symbols may be displayed above the ink level:
!
if ink is low,
×
if no ink is left, and
?
if you
have deactivated ink level detection.
The remaining ink level is indicated as shown below.
If the Display Screen indicates to replace the Ink Tank, replace the Ink Tank. If a message is
displayed indicating to check the remaining ink levels, or after tasks that consume a lot of ink such
as large-format printing or head cleaning, check the remaining levels and replace Ink Tank as
needed. (See "Replacing Ink Tanks (
10.1.2
).")
]
file:///H|/ITC-dd/Projects/Ud/WFPS/oostende%205/...port/iPF750%20User%20Manual/lang/print/cp07.html (9 of 48) [4-3-2010 11:37:11