Oce CS2436 User Manual - Frequently Asked Questions
Troubleshooting (CS2436-11)
11. 1. 1.
Troubleshooting > Frequently Asked Questions >
Frequently Asked Questions
This section presents frequently asked questions and answers. To view more detailed
explanations, click the hyperlinks in the answer column.
Question
Answer
How do I print on a roll?
When printing on rolls, after loading the
roll, specify the paper type and length, both
on the Control Panel and in the printer
driver.
⇒
"Loading and Printing on Rolls (
1.1.2
)"
How do I print on a sheet?
When printing on sheets, specify the paper
type and size in the printer driver before
loading the paper.
⇒
"Loading and Printing on Sheets (
1.1.3
)"
How do I switch between
printing on rolls and sheets?
When you complete operations on the
Control Panel to load or replace paper, the
paper source is automatically switched to
the selected paper.
⇒
"Loading Rolls in the Printer (
6.2.2
)"
⇒
"Loading Sheets in the Printer (
6.3.1
)"
How do I change the paper
type or size?
Specify the type and size of paper, both on
the Control Panel and in the printer driver.
・
Specifying it in the printer driver
⇒
"Specifying Paper in the Printer
Driver (
3.2.3
)"
・
Specifying it on the Control Panel
Selecting the paper type
⇒
"Changing the Type of Paper (
6.2.3
)"
Selecting the paper size
⇒
"Specifying the Paper Length (
6.2.4
)"
How do I cut the roll paper
after printing?
You can wait until ink dries before cutting
the roll, and you can cut rolls at a desired
position.
⇒
"Specifying the Cutting Method for
Rolls (
6.2.13
)"
]
file:///H|/ITC-dd/Projects/Ud/WFPS/oostende%205/...port/iPF750%20User%20Manual/lang/print/cp08.html (3 of 75) [4-3-2010 11:37:22