Oce CS2436 User Manual - page 491
Adjustments for Better Print Quality (CS2436-7)
●
Loading Rolls in the Printer (
6.2.2
)
●
Loading Sheets in the Printer (
6.3.1
)
Note
・
Always make sure the loaded paper matches the type of paper
specified. Adjustment cannot be completed correctly unless the loaded
paper matches the settings.
2.
On the
Tab Selection screen
of the Control Panel, press or to select the Settings/
Adj. tab (
).
Note
・
If the
Tab Selection screen
is not displayed, press the
Menu
button.
3.
Press the
OK
button.
The
Set./Adj. Menu
is displayed.
4.
Press or to select
Adjust Printer
, and then press the
OK
button.
5.
Press or to select
Feed Priority
, and then press the
OK
button.
6.
Press or to select
Adjust Length
, and then press the
OK
button.
7.
Press or to select
AdjustmentPrint
or
Change Settings
, and then press the
OK
button.
When you select
AdjustmentPrint
, a test pattern is printed for you to measure the scale
and calculate the discrepancy. The scale bar shows
Millimeter
in 50 mm units and
Inch
in
1 inch units.
file:///H|/ITC-dd/Projects/Ud/WFPS/oostende%205/...port/iPF750%20User%20Manual/lang/print/cp70.html (23 of 25) [4-3-2010 11:36:36]